GPU VulnDB

Database/Firmware, BMC & network fabric

Juniper Junos OS: malformed DHCP packets stop ingress packet processing when DHCP snooping is on

CVSS 7.1CVE-2024-39526Firmware, BMC & network fabriccurated

Impact

Malformed DHCP packets sent to an affected line card make ingress packet processing stop, and the interface goes down. If the packets keep arriving, the outage keeps going. This covers MX Series with MPC10/MPC11/LC9600 line cards, MX304, EX9200 with EX9200-15C line cards, and PTX Series on Junos OS Evolved. Where these devices are the datacenter core or the edge, one adjacent sender can cut traffic to every GPU node and storage system behind the affected interfaces. Only devices with DHCP snooping enabled are affected.

Who can reach it

An unauthenticated attacker on the same broadcast domain (adjacent network) as an interface with DHCP snooping enabled. No credentials needed.

What to do

Upgrade Junos OS to 21.2R3-S7, 21.4R3-S6, 22.2R3-S3, 22.4R3 or 23.2R2 (no fix is listed for the 22.3 train, so move off it). Upgrade Junos OS Evolved on PTX to 21.2R3-S8-EVO, 21.4R3-S7-EVO, 22.1R3-S6-EVO, 22.2R3-S5-EVO, 22.3R3-S3-EVO, 22.4R3-S1-EVO, 23.2R2-S2-EVO or 23.4R2-EVO. A router OS upgrade needs a network maintenance window, or a rolling upgrade where the device has redundancy. Devices without DHCP snooping enabled are not affected. To detect it, look for interfaces going down and 'Host Loopback Wedge Detected' in the log messages.

References

Related entries

All Firmware, BMC & network fabric entries

This entry is curated: imported from vendor advisories with machine assistance, not yet individually verified. Confirm against your vendor's advisory before acting, and report anything wrong.